About the one TV set power board. I measure about 40 volts on the place where 2*LED backlight strips should be inserted.

Is it normal when:
- led strips are pulled ?
- they are not ?

Thanks

 

Unfortunately today's TV sets are not something I am really any good at. Thus I wouldn't be of much help. I did get your message and sorry took a day to reply.

Ron

 

i cannot understand something very simple.
This board gives - to LED strip 1. where from LED strip 1 takes the other - > The Plus ?
+ to LED strip 2 . where from it takes the Minus ?

I have one new backlight but when put one new and one of the old i have no light neither on strip1 or strip2

 

The leds are all in Series...