Sir can u tell me the ic uses in a water pump controller.
*GZF-series 1014 dedicated integration*
The controller is not working now. The ic burnt. I brought it from ALI EXPRESS.
THEY ARE NOT HELPING NOW.

 

As a last resort you could reverse-engineer the circuit, the inputs for the level detectors probably go to the IC to be processed, probably just a simple logic IC.
Max.

 

https://www.umarandson.com/2018/02/automatic-liquid-level-controller.html
likely 12V op amp or comparator they use much likely SS8050 SS8550 SLA-12VDC-SL-C

weak chance LT1014

? are you sure it's the iC maybe the sensor cable threads are corroded off
or if the condensate accumulated the entire PCB may be damaged