Hello All
I have a Hygrometer/Thermometer that when I put the battery it turns on, but only for like 2 minutes, after that it dies. If I plug and unplug the battery it turns on and do the same. What might be?
All help is thankful.
Thanks

 

Sounds like a dying battery. The battery voltage drops below that require by the device and the device turns off. After sitting a bit the battery voltage rebounds and again works for a bit.

 

Sounds like a dying battery. The battery voltage drops below that require by the device and the device turns off. After sitting a bit the battery voltage rebounds and again works for a bit.

Thansk for your answer Ylli, it uses 2 x 1.5V AAA, allready buy new ones and does the same, when it fail, the scren takes like 2 seconds to clear, if immediately after put in and out the battery, it turns on again.