Well I recently Salvaged a Microwave Transformer, smaller than usual though, but I want to put power to it. I know I'll get 2000kV out, but I have an idea.
I have 2 120 to 44.5V Transformers that are capable of only 1Amp or so(I really dont know) So I was thinking that if I hooked them up like this:
120 to 44.5 resistor 44.5 to 120
I would have an isolation transformer. Now the purpose of the resistor is so I dont fry myself in the process or cause a circuit to blow,since Ive read these things can blow a 20Amp circuit breaker. The current will be limited to around 5mA.
I have 2 120 to 44.5V Transformers that are capable of only 1Amp or so(I really dont know) So I was thinking that if I hooked them up like this:
120 to 44.5 resistor 44.5 to 120
I would have an isolation transformer. Now the purpose of the resistor is so I dont fry myself in the process or cause a circuit to blow,since Ive read these things can blow a 20Amp circuit breaker. The current will be limited to around 5mA.