So I bought a module for supplying my ESP8266 with 3.3V it requires, since I currently have it running off of a 3.3V pin of an Arduino, this is the module I bought:
https://www.aliexpress.com/item/4A-...711.html?spm=a2g0s.9042311.0.0.728e4c4dNfb38r
How do I wire it up?
So I have a power plug that outputs 5VDC/1A from the wall, so I would need to take apart whatever wire comes out of the wall-wart (which is just one of those phone charging cubes) and split the wires up in order to feed this module? It seems kinda clunky way of doing it. Any other ideas of how to do this?
https://www.aliexpress.com/item/4A-...711.html?spm=a2g0s.9042311.0.0.728e4c4dNfb38r
How do I wire it up?
So I have a power plug that outputs 5VDC/1A from the wall, so I would need to take apart whatever wire comes out of the wall-wart (which is just one of those phone charging cubes) and split the wires up in order to feed this module? It seems kinda clunky way of doing it. Any other ideas of how to do this?