Hello,
I am new to the forum and need a bit of help if possible.
I just purchased a 12v 1ch relay that comes with 2 button remote.
Button on latches relay on and button 2 latches relay off.
I also have 2 separate 1ch relays.
All are 12vdc if that matters.
I have one 12 volt siren and 1 n/o door contact as well as 1 n/c door contact.
I also have a 12vdc power supply with 12v4ah battery.
I am trying to wire up my shed so if opened while I use button 1 to latch on relay that if door to shed is opened it will trigger the siren to latch on until i press button 2 of remote.
I did electronics a bit in the past but cant remember how to do that.
So can anyone give me a hand / diagram or drawing so I can set it up.
Can't put in normal alarm system so just want something easy and cheap to do.
Thanks in advance
Sigma
I am new to the forum and need a bit of help if possible.
I just purchased a 12v 1ch relay that comes with 2 button remote.
Button on latches relay on and button 2 latches relay off.
I also have 2 separate 1ch relays.
All are 12vdc if that matters.
I have one 12 volt siren and 1 n/o door contact as well as 1 n/c door contact.
I also have a 12vdc power supply with 12v4ah battery.
I am trying to wire up my shed so if opened while I use button 1 to latch on relay that if door to shed is opened it will trigger the siren to latch on until i press button 2 of remote.
I did electronics a bit in the past but cant remember how to do that.
So can anyone give me a hand / diagram or drawing so I can set it up.
Can't put in normal alarm system so just want something easy and cheap to do.
Thanks in advance
Sigma