Hello there,

I want to learn How to make robot controlled by MAT LAB.....
Please tell basic method to connect mat lab to robot simply moving ahead..!!


Thanks

 

Help please!

 

If I told you. I want a microcontroller circuit for a robot. Would you be able to help? Probably no. Because I have not given you any any details at all about anything. Then you ask questions in this forum. You must ask your self. What details are needed in order for others to help me. And here you have a lot of room for improvement. Nobody has answer your request because they have no idea of how to help you. And all the "please help!!" in the world can not fix that problem. Please remember that good questions draw good answers

 

OK, thanks....

I mean to say first like how to glow LED at least like blinking or simply on/off working with MATLAB window....
after this i will like to move forward!!

 

I would expect Matlab to talk serial to a micro on the robot. However you'd then be better putting all the code on the micro.

 

I would expect Matlab to talk serial to a micro on the robot.

But how to do this??

 

OK, thanks....

I mean to say first like how to glow LED at least like blinking or simply on/off working with MATLAB window....
after this i will like to move forward!!

It was not this I meant. You must write more about what your are doing, and how you are doing it. Something like this

I am using matlab version xx, with the toolkit zz. I am also using board yyy from manufacturer cccc. The board is connected to the PC via USB cable. I am trying to <......> here is my (code, schematic and so on). My problem is <.......> So far I have done <......> and also checked <....> but I am still having problems

How can you expect us to use time on your problem. Then your effort to describe your problem is next to nothing.

 

http://www.mathworks.com.au/help/techdoc/matlab_external/f105659.html

Or is it the micro end you're having trouble with?

 

It was not this I meant. You must write more about what your are doing, and how you are doing it. Something like this

Or is it the micro end you're having trouble with?

Actually i have seen some video of image processing in bots, so i have no idea how we can make use of MAT LAB to Hardware!!