how to check pnp transister whith analog or digital meter.


the pnp transistor is in circuit now .


to check it need remove from circuit


or it can be check in transistor

or it will check power up the circuit

 

Did you read the link I gave you in the other thread you started?

 

Originally posted by JoeJester@Jan 5 2006, 11:10 AM
Did you read the link I gave you in the other thread you started?

[post=12904]Quoted post[/post]​

Hi Newone,access the link and do some practice out of circuit. A few more things to note, the tests are equally valid with an analog meter,however the polarity of the leads are reversed RED is NEGATIVE and BLACK is POSITIVE. Use on Rx10.Note the .665 or any similar value is with digital meter on diode function.Youshould take off power when testing transistors in circuit

 

Originally posted by alim@Jan 5 2006, 11:37 AM
Hi Newone,access the link and do some practice out of circuit. A few more things to note, the tests are equally valid with an analog meter,however the polarity of the leads are reversed RED is NEGATIVE and BLACK is POSITIVE. Use on Rx10.Note the .665 or any similar value is with digital meter on diode function.Youshould take off power when testing transistors in circuit

[post=12905]Quoted post[/post]​

thanks more

solution