Hi i hope this is in the right price a few days ago i was using my horzion T4000 Treadmill and all of a sudden it turned off and the display wouldn't turn on so i checked the motor control board and saw a burn mark on the pcb by where the smaller bridge rectifiers is so i replaced it however the screen still didnt turn on so i figured out that one of there traces had been taken out when the bridge rectifiers blew i fixed this and the display started to work however the issuie now is that the motor doesnt work/spin and for some reasons the incline motor takes very very very long to go up and down and i can hear the relays clicking way while the incline motor trys to go up and down....does anyone know what should i start looking/testing for
Thanks for the help
Thanks for the help
