Hello
I am am trying to run a nanosecond pulser circuit. This circuit is controlled by a flap. Therefore, a nanosecond pulse is generated and increased to 8 volts by an amplified transistor. Then, the transistor is connected to the MOSFET gate.
I designed this circuit to have a strong single pulse of light. Also operating-speed of the circuit is 100 nanoseconds.
My problem is with the Hebrew current through the ledge which a very little current passes through. But I want about 10 amps to pass through this led current.
Please let me know what is the problem with my circuit.
I am am trying to run a nanosecond pulser circuit. This circuit is controlled by a flap. Therefore, a nanosecond pulse is generated and increased to 8 volts by an amplified transistor. Then, the transistor is connected to the MOSFET gate.
I designed this circuit to have a strong single pulse of light. Also operating-speed of the circuit is 100 nanoseconds.
My problem is with the Hebrew current through the ledge which a very little current passes through. But I want about 10 amps to pass through this led current.
Please let me know what is the problem with my circuit.