Hi All,
This is my first post to the forum.
I have a speaker connected to a circuit board and then to an iPad. The audio is playing through the speakers but at a really low volume.
The speaker is a Euro Tec 4 ohms RMS 30W.
On the blue switch (1-8) 1 and 2 must be in the down position for the speaker to have any power/ signal. The other 6 it seems to make no difference on position.
I have turned up the Sound Volume and In-line Volume to max but it makes no difference.
Please see images. Any ideas?
Thanks in advance!
This is my first post to the forum.
I have a speaker connected to a circuit board and then to an iPad. The audio is playing through the speakers but at a really low volume.
The speaker is a Euro Tec 4 ohms RMS 30W.
On the blue switch (1-8) 1 and 2 must be in the down position for the speaker to have any power/ signal. The other 6 it seems to make no difference on position.
I have turned up the Sound Volume and In-line Volume to max but it makes no difference.
Please see images. Any ideas?
Thanks in advance!
Attachments
-
214.4 KB Views: 27
-
292.6 KB Views: 28