I need help constructing a Bipolar Transistor switch in multisim. In my lab, I constructed the circuit shown here. But when I got home, I realized my measurements were all wrong. So, I'm trying to use multsim to contruct the circuit, and get the right measurements.
The measurements i've been getting are.
Vbe = .680 V
Vcb = 2.727 V
Vce = 1.470
Measurement I should be getting
Vce should be 1 to 4 volts
Vbe should be .6 to .8 range
Vcb 1 volt or so
I posted a pic of what I have so for in multisim.
The measurements i've been getting are.
Vbe = .680 V
Vcb = 2.727 V
Vce = 1.470
Measurement I should be getting
Vce should be 1 to 4 volts
Vbe should be .6 to .8 range
Vcb 1 volt or so
I posted a pic of what I have so for in multisim.
Attachments
-
287.7 KB Views: 106
-
21.9 KB Views: 80