I am getting 5.35V (loaded) from a LM2675-5 from the PCB I just created. My Pic simply will not tolerate the over voltage.
I bread boarded the same circuit and I am getting 4.97V from the bread boarded circuit. I placed the chip in the PCB in the bread board and it gives me the 4.97V too.
Any ideas what could cause this over voltage?
I bread boarded the same circuit and I am getting 4.97V from the bread boarded circuit. I placed the chip in the PCB in the bread board and it gives me the 4.97V too.
Any ideas what could cause this over voltage?
Attachments
-
10 KB Views: 19