Hello,
I am using a TC4425MJA 6 amp mosfet driver and am wondering what resistors to use. I am thinking 2.2 ohm in order to make it so I still have the full 6 amps at 15 volts. However is this too low? Would this almost be the same as having no resistor?
I am using a TC4425MJA 6 amp mosfet driver and am wondering what resistors to use. I am thinking 2.2 ohm in order to make it so I still have the full 6 amps at 15 volts. However is this too low? Would this almost be the same as having no resistor?