Evaluating 1-wire eeprom

Thread Starter

Yatin trikha

Joined Oct 12, 2021
10
We are working on a board and we need to read one eeprom with part number ds2432.
It is 1 wire and connected in series with MCU.
I have done making MCU development and evaluation kit.
Not sure how to read ds2432.
Please help me which programmer I can use. Or which evaluation board or circuit I can make???
 

Papabravo

Joined Feb 24, 2006
21,029
We are working on a board and we need to read one eeprom with part number ds2432.
It is 1 wire and connected in series with MCU.
I have done making MCU development and evaluation kit.
Not sure how to read ds2432.
Please help me which programmer I can use. Or which evaluation board or circuit I can make???
I would start with the datasheet for the part. The Abridged datasheet from Analog Devices (who purchases Dallas Semiconductor some years ago). Read up on the one wire protocol and get back with me with questions if you don't understand.

https://www.analog.com/media/en/technical-documentation/data-sheets/DS2432.pdf
 

Thread Starter

Yatin trikha

Joined Oct 12, 2021
10
I would start with the datasheet for the part. The Abridged datasheet from Analog Devices (who purchases Dallas Semiconductor some years ago). Read up on the one wire protocol and get back with me with questions if you don't understand.

https://www.analog.com/media/en/technical-documentation/data-sheets/DS2432.pdf
Yes dear, I had this datasheet already and have gone through it roughly but I couldn't locate any icsp details in it.
In the board we are studying it is in series with tm4c1290 and we have thorough knowledge about it. We are not sure how to read/write DS2432.
IF YOU CAN HELP US IN THIS PLEASE SHED SOME LIGHT.
 
Top