EMI-RFI Filter for home power supply

Thread Starter

Fanfire174

Joined Mar 13, 2018
240
I have one EMI-RFI Filter and I want to use it for the home power supply I have seen wiring of EMI-RFI Filter I had doubt so I thought It would best to ask an expert person for wiring connection

I am having is with the following products:
-24V DC SMPS
-MCB
-EMI-RFI Filter

Can someone tell me the wiring connection?


upload_2019-3-27_15-47-58.png
 

Thread Starter

Fanfire174

Joined Mar 13, 2018
240
Given the question, I'm slightly cautious giving advice.

The output from the MCB should connect to the Line input on the filter and the power supply should connect to the Load output of the filter. Don't forget to earth the filter and the power supply.
I was trying to get details of the filter from datasheet https://www.semikart.com/product/EF-1B010B01A-C02/388826

I don't find the datasheet it says The page you requested was not found

I don't have much information on pin's of Filter
 

Thread Starter

Fanfire174

Joined Mar 13, 2018
240
Given the question, I'm slightly cautious giving advice.

The output from the MCB should connect to the Line input on the filter and the power supply should connect to the Load output of the filter. Don't forget to earth the filter and the power supply.
actually, I don't understand Pin logic of filter. I think the three pin's s of the filter are input pins and two pins are output pin's of filter

I don't understand which pin is line, neutral and ground of filter?
 
Top