I am currently seeking a 2 terminal connector for one of my Varistors. The purpose of the connector is to connect the 2 terminals of the Varistor to the connector, connect the other 2 ends of the connector to a board, and then place the board in our life test oven with 600VDC applied to test leakage. The connector must be rated for 1,000VDC for future testing that we will undergo at 1,000VDC. The connector must be able to handle a temperature rating from -40°C to 85°C or -55°C to 85°C. The connector must be 2 terminals, and the diameter for the leads to be inserted must be 20mm. We can cope with an 18mm diameter as well but no lower than that. We currently have a few samples of a 3 terminal device that could work for our Varistors however we only need 2 terminals and something more cost effective. The 3 terminal connector that we have cost $10/each and we are looking for something cheaper. I have attached pictures to this email of the 3 terminal device. We are looking for something along the lines of that except for just 2 terminals. I have tried Molex.com, Grainger.com, I am still looking at Newark.com and have been told that they do not have anything for my specs. Attached to this are pictures of the 3 terminal connector that we have. As stated earlier something along the lines of the pictures just 2 terminals. If anyone knows of anywhere that would be great. Well thank you very much for your time and if you have any recommendations for any connectors matching these specs please let me know. Thank you
Attachments
-
66.5 KB Views: 12
-
73.8 KB Views: 9
-
76.3 KB Views: 10
-
89.9 KB Views: 10