is there anything here of value.
Attachments
-
239.7 KB Views: 78
-
190.6 KB Views: 80
it is a disassembled 1989 nokia cell phone box model M-10is there anything here of value.
and the pins and other areas look to be as if its gold but I'm a novice at bestit is a disassembled 1989 nokia cell phone box model M-10
There's very little gold. There are gold bond wires in the IC's; also too little to think about recovering.and the pins and other areas look to be as if its gold but I'm a novice at best
Unless you have a use for specific components, probably the greatest value is any gold plating on connectors, and you'd need to be set up to separate it.is there anything here of value.
Really, unsoldering SMT parts is SO much simpler that thru-hole parts in close fitting plated thru holes. For multi-legged parts a big blob of solder melts it all loose and then solderwick cleans it up. Multiple steps but none of them difficult.Getting parts off old boards was easy. Now with thru hole plating and solder on both sides of a board it is much harder. Especially IC's and other multi legged creatures. I only bother if I REALLY need the part.