Hi all,
I wasn't sure where to post this, but chemistry is pretty much physics, right?
I have a gen chem lab final coming up on Thursday and we are going to be given 10 unlabeled test tubes where we have to identify the substances in each one. So Im looking for tips, tricks, and basically anything to add that will help this process go as smoothly as possible.
The substances we are going to be given are:
Aluminum nitrate - Al(NO3)3
Ammonia - NH3
Hydrochloric acid - HCl
Magnesium nitrate Mg(NO3)2
Nitric acid HNO3
Silver nitrate AgNO3
Sodium carbonate NaCO3
Sodium chloride - NaCl
Sodium hydroxide - NaOH
Zinc nitrate Zn(NO3)2
Our teacher told us that 3 of them are acidic and 3 are basic. However, theres only two that jump out as being acidic (HCl and HNO3), theres only one that jumps out as being basic (NaOH). Searching on google for pH levels I found two other possible basic substances (NH3 and NaCO3). The pH levels that I found to be more neutral were NaCl, Al(NO3)3, and Mg(NO3)2. Do these seem right? The two I couldnt find pH levels for are AgNO3 and Zn(NO3)2, so I have no idea what categories these would fall into.
We are going to be given time to experiment just before we take the final with each substance labeled so we can see what kind of reactions they undergo and what products are formed. We can also use our lab notebook and any notes we have on the final. So Im trying to think ahead now and figure out a good plan of action to get through it. Here are the steps Ive come up with thus far:
1. Obviously look for any color differences in each substance. Im assuming theyll all be clear colored to keep us from getting anything right off the bat, but one can hope.
2. Test the pH of each substance and set them into groups for acidic, basic, and neutral.
2.5 See if I can identify any substances right off the bat based on the pH levels. That would be very nice if one or more of them give unique pH levels.
3. Then I guess its just a matter of picking one of the acids and testing that one against all the others to figure out what the acid is. Maybe thatll help identify others along the way. I don't know which one would be a good one to start with, so I guess just pick any one and go with it?
The main thing is to make sure that I can narrow it down enough so I dont end up thinking one substance is something else because they gave a few similar results. Our teacher told us is that HCl + AgNO3 will result in a light purplish color, so if Mg(NO3)2 also gives a purple reaction I need to have some other tests to run so I wont confuse the two.
Another thing Ive looked into is the solubility table to see which ones will form solids and only Na2CO3 and NaOH will form solids. Since they are both bases Ill have to figure out what else they react with to distinguish them apart.
Thats pretty much where Im at for the moment. If anyone has any helpful advice on how to approach this thing, whether its adding on to what I have or completely different, Id really appreciate it.
Thanks
-tkr
I wasn't sure where to post this, but chemistry is pretty much physics, right?
I have a gen chem lab final coming up on Thursday and we are going to be given 10 unlabeled test tubes where we have to identify the substances in each one. So Im looking for tips, tricks, and basically anything to add that will help this process go as smoothly as possible.
The substances we are going to be given are:
Aluminum nitrate - Al(NO3)3
Ammonia - NH3
Hydrochloric acid - HCl
Magnesium nitrate Mg(NO3)2
Nitric acid HNO3
Silver nitrate AgNO3
Sodium carbonate NaCO3
Sodium chloride - NaCl
Sodium hydroxide - NaOH
Zinc nitrate Zn(NO3)2
Our teacher told us that 3 of them are acidic and 3 are basic. However, theres only two that jump out as being acidic (HCl and HNO3), theres only one that jumps out as being basic (NaOH). Searching on google for pH levels I found two other possible basic substances (NH3 and NaCO3). The pH levels that I found to be more neutral were NaCl, Al(NO3)3, and Mg(NO3)2. Do these seem right? The two I couldnt find pH levels for are AgNO3 and Zn(NO3)2, so I have no idea what categories these would fall into.
We are going to be given time to experiment just before we take the final with each substance labeled so we can see what kind of reactions they undergo and what products are formed. We can also use our lab notebook and any notes we have on the final. So Im trying to think ahead now and figure out a good plan of action to get through it. Here are the steps Ive come up with thus far:
1. Obviously look for any color differences in each substance. Im assuming theyll all be clear colored to keep us from getting anything right off the bat, but one can hope.
2. Test the pH of each substance and set them into groups for acidic, basic, and neutral.
2.5 See if I can identify any substances right off the bat based on the pH levels. That would be very nice if one or more of them give unique pH levels.
3. Then I guess its just a matter of picking one of the acids and testing that one against all the others to figure out what the acid is. Maybe thatll help identify others along the way. I don't know which one would be a good one to start with, so I guess just pick any one and go with it?
The main thing is to make sure that I can narrow it down enough so I dont end up thinking one substance is something else because they gave a few similar results. Our teacher told us is that HCl + AgNO3 will result in a light purplish color, so if Mg(NO3)2 also gives a purple reaction I need to have some other tests to run so I wont confuse the two.
Another thing Ive looked into is the solubility table to see which ones will form solids and only Na2CO3 and NaOH will form solids. Since they are both bases Ill have to figure out what else they react with to distinguish them apart.
Thats pretty much where Im at for the moment. If anyone has any helpful advice on how to approach this thing, whether its adding on to what I have or completely different, Id really appreciate it.
Thanks
-tkr