DIY bonding 2x 0.8mm S/S boards to make a 1.6mm D/S board

Thread Starter

AlbertHall

Joined Jun 4, 2014
11,309
I machine PCBs on a CNC and I prefer FR2 material as fibre glass boards are vicious on tools. At the moment I can't find double sided FR2 board but there is single sided FR2 0.8mm thick.
What are my chances of successfuly bonding two of these back to back and how would I do this?

[EDIT] OK, the problem is solved. I finally found some D/S on ebay.
 
Last edited:
Top