I am looking for some advise on how to transmit status of a digital pin over wireless. I will have a transmitter module whose digital pin will be toggled. It can toggle at a rate of 1Hz up to 1kHz. I want to reflect same toggle on the receiver side. Receiver should also have digital pin that gives the current state of Tx module digital pin.
Now I have already tried with XBee Series 2 IO line passing but it works near the lower toggle rate (1 Hz) but does not seem to work on higher toggle rate. Any advise or help would be beneficial.
Now I have already tried with XBee Series 2 IO line passing but it works near the lower toggle rate (1 Hz) but does not seem to work on higher toggle rate. Any advise or help would be beneficial.
Attachments
-
45.9 KB Views: 8