So i have been given an assignment to build, simulate and figure out the temperature performance of my circuit for our size model.
(different than that used in the book).
The kicker is i do not have a BJT to use since our student version does not have one. I have tried countless ways of representing a BJT but none have given me a level off graph similar to the one i need.


Attached:
1. Original circuit in book
2. Graph from book
3. My attempt at making it with out a BJT configuration.
4. 2 attempts i have made out of 10 tries
(note i allow played with these two the most with different R values)

 

you don't need BJTs, those three are wired (and labelled!) as diodes

 

you don't need BJTs, those three are wired (and labelled!) as diodes

Forgot to correct myself. The program does not have diodes either. We have basic logic gates, resistors, capacitors and N transistors and P transistors.

 

Don't know how you can simulate a BJT if you don't even have a model.

 

I'd recommend going to your instructor and asking how you are supposed to model a circuit that uses devices that your simulator doesn't support. It could be that they have models and you didn't get them for some reason. It could be that you are supposed to use the simulators installed on the department's computers that have a full license. Check.