I’ve bought a delayed start relay module for my problem, but was wondering since my application is so simple if there was an equally simple alternative.
I have a DC (geared) motor that is turned on with an SPST switch. I want the motor to be delayed less than a second (to a second or two) after the switch is toggled.
The toggle switches +6V to the motor. Can I place a cap between the switched power and ground to delay the motor?
I have a DC (geared) motor that is turned on with an SPST switch. I want the motor to be delayed less than a second (to a second or two) after the switch is toggled.
The toggle switches +6V to the motor. Can I place a cap between the switched power and ground to delay the motor?