I have a DAC with the output of 1-5 V, how can I convert it to have 1-110v. what methods can be used.

Thank You

 

Is that 1-110V DC? How much current and/or power?

 

actually it's a DC. Simply I want to control the amplitude of the outlet on the wall digitally with micro controller.Further I will use it as to dim the light. Looking for the solutions

thank you

 

This is the idea to be your refernce.

DAC (1~5Vdc) → E amp using Op Amp(Vo≦36Vdc↓,Vcc≦40V) → Transistor(Push-Pull Output) 110Vdc.

The Vcc and GND of the transistor, must be higher than 110Vdc + (1.1V*2).

 

actually it's a DC. Simply I want to control the amplitude of the outlet on the wall digitally with micro controller.Further I will use it as to dim the light. Looking for the solutions

thank you

Do you mean to control the voltage appearing at a wall power socket of the same kind as normally used for the AC mains?

I would suggest you use a completely different type of outlet,as someone other than yourself may connect some appliance which either draws more current than your proposed device can supply,or which uses a transformer.
In each case,it will mean destruction for your device,& maybe the appliance as well.

In some administrations,it may be illegal to connect 110V DC to a standard wall socket.

 

actually it's a DC. Simply I want to control the amplitude of the outlet on the wall digitally with micro controller.Further I will use it as to dim the light. Looking for the solutions

Purchase a light dimmer. They work fine with light bulbs, at least. From your original suggestion on how to solve this. I can see that you lack some experience in order to do this. And it is also not legal to connect such home-brew equipment to the mains. The reason, it is highly unsafe.