Hello, As you can see below I have a simple Mosfet where a current goes threw R1.(its 0.1Ohm)
In real life my mosfter is a power amplifier PMA5-83-2W shown in the link below and my V2 in real life is a relay system shown below.
The relay outputs voltage "V2" on a certain time period where all the feedback action needs to taken place.
In the final united photo below I have the current sensing chip and the relay with variable output.
I want some how to get the the relay system of LTC1261LCS8 to change the output voltage according to the feedbacl from the current sense chip LT6119.
Is there a way?
LTspice files are attached.
Thanks.
https://www.minicircuits.com/pdfs/PMA5-83-2W+.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/611912f.pdf

 

Is there a way?
LTspice files are attached.

How about making it easier for us to help you by drawing a schematic that's readable?

The symbols for U1, U2, and U2 are useless for conveying circuit intent.