Hello All,

We used a 4 pin crystal oscillator and we get a signal which is at attached file.

This signal is not suitable for me. I want 0-5V signal. What kind of component should I add my circuit ?

Thanks for help.

http://p1305.hizliresim.com/19/r/ncvm5.jpg

http://s1305.hizliresim.com/19/r/ncvn2.png

 

The signal is 0-5V with some ringing, which may be an artifact of how you are connecting the ground lead for the scope. It's centered around zero volts since you have the oscilloscope input set for AC input; it should be set to DC.

Is there something else wrong with the signal?