So I have a circuit currently fitted with two 2732s and which I'd like to swap for a single 2764... but I'm having a bit of a brain block correlating the control lines for the 2732 to those for the 2764.

What am I not seeing?

 

2764 has the following pins:

Pin Name
2 = A12
20 = /CE
22 = /OE

2732
18 = /CE
20 = /OE

Connect A12 to 2764 pin-2
Connect GND to 2764 pin-20
Connect N1 to 2764 pin-22

 

Thanks! I'll give it a go.

 

I laid out and sent in an order for a small adapter board (it plugged into where U4 would reside on the board) and it worked! Thank you!