Hi guys,
I'm currently trying to make a counter so that, it counts if the gear shift fails 3 times then the logic fail ie red light. gear change is successful when S=G, S=G-1, S=G-1.
For this part, the car has a gearbox that can withstand up to a number of unsuccessful gear changes (N) and it will break if that number is reached. The number N ranges from 1 to 7 and must be set via a combination of three separate inputs: N1, N2, and N3. An N value of 0 is not allowed and the gearbox state is undefined for this case. This means that you will have to set N to be non-zero (1..7) before starting the engine engaging the gearbox. Note: In Logisim, you can combine the 3 inputs for N into a single 3 bit input.
I'm currently trying to make a counter so that, it counts if the gear shift fails 3 times then the logic fail ie red light. gear change is successful when S=G, S=G-1, S=G-1.
For this part, the car has a gearbox that can withstand up to a number of unsuccessful gear changes (N) and it will break if that number is reached. The number N ranges from 1 to 7 and must be set via a combination of three separate inputs: N1, N2, and N3. An N value of 0 is not allowed and the gearbox state is undefined for this case. This means that you will have to set N to be non-zero (1..7) before starting the engine engaging the gearbox. Note: In Logisim, you can combine the 3 inputs for N into a single 3 bit input.