Hi,
I have a battery charger that has spring loaded rails that move across one another but they are VERY hard to move.

I'm looking for a conductive, high viscosity (so it won't drip or run down into the electronics below), paste for this.
Would MG Chemicals Carbon Conductive Grease be a good item for this?
Any suggestions?

Thanks

 

http://ph.parker.com/us/17051/en/cho-lube-4220-electrically-conductive-grease
Max.

 

I would try a little graphite powder first.....and check for normal electric operation. It can easily be removed if it doesn't work. Just a brush and/or air hose.