I am at ground zero with this idea so please bear with my ignorance. I make desk lamps, I would like to incorporate low voltage LED bulbs with separate 120V incandescent using a three position rotary switch. The switch would be built into the base, or the wire if a wire installed switch exist. In my mind I see a wire like a USB that would carry the 120V and the Led wires. This would plug into a power supply that would handle both circuits, which then would plug into the wall. I do not need the low voltage LED but in my cursory search that is all I find in the bulbs that will work for my idea. I do not have room in the lamp base for any type of convertor that I have seen. Ground zero!
I hope I have been clear in my description.
Thanks for any assistance
Dave
I hope I have been clear in my description.
Thanks for any assistance
Dave