What will happen if the output pins of two comparators(LMV393) are shorted?
AND gate?OR gate
can you please elaborate on this ? I think this is the issue with my circuit.Welcome to AAC!
If the two outputs share a common pull-up resistor they can behave like an OR gate.
If either comparator A output goes low OR comparator B output goes low then, since the outputs are connected, the output C of the combination is low. The resistor is the only thing which can pull the output high.can you please elaborate on this ?
by Duane Benson
by Jake Hertz
by Duane Benson
by Aaron Carman