I have made a schematic of breakout board for STM32F205RBT6.
I will make a square board with all pins from MCU coming out to outer 2.5mm headers.
1. Symbols in schemtaic with name "Nx", are bascially are small jumpers with 0805 size.
2. I have some odd debug connector here. I have made this kind of connection for other boards so that's not a problem.
Any comments/suggestions on ckt.
I will make a square board with all pins from MCU coming out to outer 2.5mm headers.
1. Symbols in schemtaic with name "Nx", are bascially are small jumpers with 0805 size.
2. I have some odd debug connector here. I have made this kind of connection for other boards so that's not a problem.
Any comments/suggestions on ckt.
Attachments
-
78.1 KB Views: 7