Hello to all my name is Tom this being my first post I hope I'm in the right place. I purchased a non-working DJI Insire drones that would be unaffordable if working. It came with two DJI intelligent flight battery with only one working. In troubleshooting I shorted the good circuit board voltage regulator with my meter tips checking voltage. These are DJI TB48 battery spec. 22 .8 volts ,5700mAh and 129.96 Wh .
My issue is I can not identify this voltage regulator 2A701 ( attached photo) I try but can not get the schematics and I am only more confuse in my search . Tom

 

https://pdf1.alldatasheet.com/datasheet-pdf/view/177902/TOREX/XC6372.html (English)
Full name of this part is XC6372A701.
EDIT:


https://smd.yooneed.one/code3241.html

Maybe 2A701 is China variant of marking

 

Hi Danko,I did a SMD search wend I started and came up with the same number so I contacted Torex Semiconductor and was in contact with a very helpful gentlemen name Sean after several back and forth I sent him the photo and he came back and said it was not their chip. Now rereading his text he did't say It would not work? Does the marking on the top line up with this type of chip? Tom

 

Danko,thanks for all your help i'm going to contact Torex today. I will report back how it goes. Tom