Hello , i 'm skeptical about some things and would appreciate your help .
At the first drawing of the image i attached there is a charged capacitor (was charged from the circuit when the switch was at position 1 ) which is currently part of an open circuit(switch at position 3 ) and after a specific amount of time will make a loop with the voltage source ( switch position 2).
My queries are these :
a) Will there be current flowing through the Resistance? (there is a voltage difference across the resistance so i think there should be current flowing , (V1-Vc)/R
b) Will the capacitor discharge or not? Should it discharge if there is no current flowing as it is an open circuit?(assuming we are close to the settling time )
At the second drawing of the image ( Z is an inductor , couldn't draw it good enough
) the switch is at position 1 and after some time goes at position 2.
I have found the complete response of the circuit at position 1 and i 'm wondering , since the time it takes for the switch to switch positions is not bigger than the settling time of the circuit (not at steady state yet ) what will the initial conditions at 2 be?
I obviously shouldn't just use the forced response to find them because its not a steady circuit yet , but shall i use the complete response or just the natural response ?
At the first drawing of the image i attached there is a charged capacitor (was charged from the circuit when the switch was at position 1 ) which is currently part of an open circuit(switch at position 3 ) and after a specific amount of time will make a loop with the voltage source ( switch position 2).
My queries are these :
a) Will there be current flowing through the Resistance? (there is a voltage difference across the resistance so i think there should be current flowing , (V1-Vc)/R
b) Will the capacitor discharge or not? Should it discharge if there is no current flowing as it is an open circuit?(assuming we are close to the settling time )
At the second drawing of the image ( Z is an inductor , couldn't draw it good enough
I have found the complete response of the circuit at position 1 and i 'm wondering , since the time it takes for the switch to switch positions is not bigger than the settling time of the circuit (not at steady state yet ) what will the initial conditions at 2 be?
I obviously shouldn't just use the forced response to find them because its not a steady circuit yet , but shall i use the complete response or just the natural response ?
Attachments
-
11.1 KB Views: 29