-pic16f877, have to of them and same problem for both.
-ebay bought pickit2, not the original kind.
http://cgi.ebay.com/360171992841
thats the exact kit I have.
Vpp -> pin1
Vcc -> pin2
gnd -> pin3
pgd -> pin4
pgm -> pin5
when I load up the pickit2 programmer, select my chip (16f877) and attempt to read I get "No device detected"
I have an rj45 cable connecting my pickit2 to my programming module and Vpp goes to Vpp, Vcc goes to Vcc etc etc so I dont think I have a reverse connection in that regard, like having a crossover cable or something.
am in fact getting +5 volts on Vcc when enabled.
HELP!!!
-ebay bought pickit2, not the original kind.
http://cgi.ebay.com/360171992841
thats the exact kit I have.
Vpp -> pin1
Vcc -> pin2
gnd -> pin3
pgd -> pin4
pgm -> pin5
when I load up the pickit2 programmer, select my chip (16f877) and attempt to read I get "No device detected"
I have an rj45 cable connecting my pickit2 to my programming module and Vpp goes to Vpp, Vcc goes to Vcc etc etc so I dont think I have a reverse connection in that regard, like having a crossover cable or something.
am in fact getting +5 volts on Vcc when enabled.
HELP!!!