Camco DX24 clipping at low level

Discussion in 'Technical Repair' started by carlosraj, Jan 6, 2019.

  1. carlosraj

    Thread Starter New Member

    Jan 24, 2018
    7
    0
    Hi

    I need some help in sorting out this problem with my CAMCO DX24 power amp. With the signal plugged into both channels, Channel 1 has no problem, even with the volume set to maximum. But channel 2 seem to clip with the volume set to just above half way. There is no distortion in sound, but it just clips at random. Can someone assist as what could be the problem.

    Thanks
     
  2. bertus

    Administrator

    Apr 5, 2008
    19,908
    4,138
    Hello,

    Is there a balance control?
    If so is that in the middle position?

    Bertus
     
  3. carlosraj

    Thread Starter New Member

    Jan 24, 2018
    7
    0

    No, there is no balance pot, each channel has it own volume pot.

    Thanks
     
Loading...