Building a split power supply from a 12VDC source

Thread Starter

eeprom

Joined Feb 12, 2011
1
Hello,
I have a single 12VDC supply, and I need to break this into two supplies +4.5VDC and -4.5 volts VDC so that I can run some op amps. I could use some help on this. Thanks.

ee
 

R!f@@

Joined Apr 2, 2009
10,014
Welcome to AAC.

For that u need a DC to DC converter. Since you asking the question I do not think you can make one.
Better buy a dual supply or try to make one from salvaged parts.
 

SgtWookie

Joined Jul 17, 2007
22,230
Rif@@, there are more options than that.

eeprom,
Is the +/-4.5v the absolute limits for your supply voltages, or could you use +/-6v?

Do you know what your current requirements are?
 

t06afre

Joined May 11, 2009
5,934
What kind of current do you need. If you only need modest current like in mA range you may google "virtual ground circuit"
 

R!f@@

Joined Apr 2, 2009
10,014
I know Sgt..I was just starting to ask him what OP has and what level of experience OP has to make such a thing
 
Top