Hello everyone
In my drone system i observed some strange build up on some silicone wires (see attached images).
The wires I use are of the following type:
https://hobbyking.com/en_us/turnigy...NyY4I314g94NDmnXW5_iD8xXgb9Qq22RoC4rQQAvD_BwE
Could it be some interference with the lead-based solder I use or is it some kind of additive mixed into the silicone isolation?
Thanks in advance and kind regards
Raphael
In my drone system i observed some strange build up on some silicone wires (see attached images).
The wires I use are of the following type:
https://hobbyking.com/en_us/turnigy...NyY4I314g94NDmnXW5_iD8xXgb9Qq22RoC4rQQAvD_BwE
Could it be some interference with the lead-based solder I use or is it some kind of additive mixed into the silicone isolation?
Thanks in advance and kind regards
Raphael