Build an Emergency Telephone PCB for Elevator

MisterBill2

Joined Jan 23, 2018
28,550
What I have seen that was really cool is "sound powered " phones. The microphone element is some sort ofvariable reluctance device that generates enough power to drive the receiving element with using ONLY a direct connection. I actually bought a set many years back, and they certainly are "sound powered", needing no other source of power at all. They were great for kids who did not want to frequently buy batteries.
I think fire-crews use that sort of system to communicate in tall buildings, but I have no actual verification of that.
 

MisterBill2

Joined Jan 23, 2018
28,550
The BAD NEWS is that with all of those picky rules about accessability and everything else, many places do not install any phone at all, BECAUSE all of those rules price it out of reach!
 
I recall that at one church an "emergency phone" was installed in a two level LIFT syatem. It was programmed to auro-dial the local EMS "911" service. It DID get excessive use.
Eventually there was a note posted above the phone to call ME if there was a problem, since I did have keys to access the building AND I was able to operate the emergency lowering system, which did not require any mains power.
 
Top