Bootloading atmega328

Discussion in 'Embedded Systems and Microcontrollers' started by sureshparanjape, Mar 1, 2015.

  1. sureshparanjape

    Thread Starter Active Member

    Feb 10, 2012
    I have tow development boards- Duemilanove and Freeduino.There is very helpful material about boot-loading on arduino web page -
    I can use Duemilanove as host board and Freeduino as target board for bootloading atmega328 (or switching the boards playing different roles )as per the procedure described on web page.
    My question is if I use Duemilanove as host then the boot-loaded atmega32 by the procedure ,will it work on only Duemilanove boards and not work on other boards?