Battery Powered USB-C PD Power Supply

Discussion in 'General Electronics Chat' started by james211, Feb 2, 2019.

  1. james211

    Thread Starter Active Member

    May 29, 2012
    233
    2
    I'm not really sure where to start with this, so I'm starting here, and maybe someone can push me in the right direction. I'm trying to figure out how to create a device (or maybe one exists) that will allow me to use a battery such as an Anton Bauer 14.4v / 91WH battery with USB-C devices. So the input would be the battery and the output would be a USB-C female plug.

    Anyone have any ideas?
     
  2. ericgibbs

    Moderator

    Jan 29, 2010
    8,569
    1,733
  3. james211

    Thread Starter Active Member

    May 29, 2012
    233
    2
    Ready made is ideal, except I'd like a single PCB with everything in one.
     
  4. ericgibbs

    Moderator

    Jan 29, 2010
    8,569
    1,733
    The module I posted is all in one, you could change the USB 'A' to a 'C' type or just use flying leads to the 'C'.
     
Loading...