I have recently completed a new stereo system using class D which works really well. I have routed the output of my digital tuner via a switch to either a DAT recorder or a CD recorder to enable quality recording of classical music from the ABC in Australia. The tuner puts out 800 mv and this is a little low to get a full signal on either the DAT or CD.
Can anyone suggest a circuit for a stereo preamp which will accept 800 mv input and provide line output, which I guess is 2 volts? Since I have plus and minus 15 volts available in the unit it would be good if the preamp ran on that.
Thanks for your help.
Barrie Davis
Can anyone suggest a circuit for a stereo preamp which will accept 800 mv input and provide line output, which I guess is 2 volts? Since I have plus and minus 15 volts available in the unit it would be good if the preamp ran on that.
Thanks for your help.
Barrie Davis