Hi,
I'm totally new to the MCU world and was asked to write a program on the STM32L432KCUx that will do the following:
BR
I'm totally new to the MCU world and was asked to write a program on the STM32L432KCUx that will do the following:
- accept up to a 4 digit value from the virtual serial port on the STM Board.
- If the 4 digit value is one of the 10 passcodes stored in an array, issue an auditory feedback signal and the text "access granted" to the serial port.
- If it is not one of the 10 allowable pass-codes, issue another appropriate auditory feedback signal, and the text "access denied."
- Also, illuminate a red led if the access is not granted and green led if access is granted.
BR