Please provide acoustic guitar amplifier schematic with Sustain Gain Volume echo reverb bass trreble mid chorus effects?
Acoustic guitar Amplifier
- Thread starter Vipul Kumar 1
- Start date
Are you kidding me?
How are you going to get echo, reverb, and chorus in an electronic circuit schematic?
Okay then if it is not possible then ignore that part and provide the schematic with rest of the features
What are you using as the pickup transducer?
PT2399 will give you echo and reverb.
http://www.princeton.com.tw/Portals/0/Product/PT2399_1.pdf
MisterBill2
- Joined Jan 23, 2018
- 18,502
For all of the features requested download the circuit of the original Fender "Dual Chorus"amplifier.
The later version uses a digital delay IC and is not as good, but the IC is cheaper. The amp might be a "twin chorus"
BUT the TS is certainly asking a whole lot.
And the question stands: what sort of pickup is used in the guitar??? It could be a coil, an amplified mic needing phantom power, a piezo pickup under the bridge, or a crystal microphone clipped on someplace. Or even a microhone on a stand near the guitar.
I suggest that the TS visit the "Sweetwater" website.
The later version uses a digital delay IC and is not as good, but the IC is cheaper. The amp might be a "twin chorus"
BUT the TS is certainly asking a whole lot.
And the question stands: what sort of pickup is used in the guitar??? It could be a coil, an amplified mic needing phantom power, a piezo pickup under the bridge, or a crystal microphone clipped on someplace. Or even a microhone on a stand near the guitar.
I suggest that the TS visit the "Sweetwater" website.
