Hello All,

Can you please help me, how to control a Ac Single phase Motor with Rf remote controller with forward-reverse-stop capability. I have found some details on web as reference. please suggest some cost effective solution.

 

More info needed on the module, not sure if it is meant ot be a RX or TX?
It shows control and output on the same board?
Max.

 

This may help but understand something you need a reversible AC motor for use with this device. Watch the linked video. There is also the manual you can read. Just remember the motor need be reversible ype AC motor to begin with.

Ron

 

is this your board, if so you can download the manual also..

http://www.rfcontrolsystem.com/index.php?main_page=product_info&cPath=255_471&products_id=1112

 

You would need to show the details of your motor, and exactly the type, AC motor is too vague.
It can take more that a couple of contacts to reverse a cap start motor.
And this also depends on how the leads are brought out on the motor.
This also is for a motor where the start/run and main windings are identical.
Max.