Hello, I need to design a circuit which is about battery separator. There are two sides of the projects. A circuit will be supplied with battery or 220Vac. Our Battery voltage is 24Vdc and it can provide approximately 50A continous current. The other side of the circuit is 220Vac. I have to decrease the 220Vac to 24Vac (battery voltage) and I have to rectify that circuit. According to system request, I must switch the supply voltage from 220V to battery or from battery to 220V. However, I need to provide 50A current from transformer side. Because of this situation, I need to use bridge rectifier which is capable of providing 50A continous current or mucher than that value.
Or, I can design a SMPS to provide this current and to supply the circuit with that. Yet, I know that the design process will be very difficult if I choose this design process.
Do you have any suggestions for me? I really need your suggestions for the design process about project. Thanks in advance.
Or, I can design a SMPS to provide this current and to supply the circuit with that. Yet, I know that the design process will be very difficult if I choose this design process.
Do you have any suggestions for me? I really need your suggestions for the design process about project. Thanks in advance.