Hi all,
I am using the attached circuit as a 12V deep cycle SLA battery charger. My input will be a 24V DC permanent magnet motor being powered by a bicycle.
I have added a diode(with a voltage drop of 1V) at the positive output terminal to prevent the battery from unnecessarily discharging. I was hoping someone could help me change the resistor network in order to change Vout to accommodate the voltage drop of the diode? (around 13.5-14V plus 1V drop)
Any other suggestions would be appreciated!
Isaac
I am using the attached circuit as a 12V deep cycle SLA battery charger. My input will be a 24V DC permanent magnet motor being powered by a bicycle.
I have added a diode(with a voltage drop of 1V) at the positive output terminal to prevent the battery from unnecessarily discharging. I was hoping someone could help me change the resistor network in order to change Vout to accommodate the voltage drop of the diode? (around 13.5-14V plus 1V drop)
Any other suggestions would be appreciated!
Isaac
Attachments
-
79.8 KB Views: 17