Here's the problem:
There are three 2-bit registers A,B, and C. Design the logic to perform:
AND: C <-- A "and" B
OR: C <-- A "or" B
And and Or are control signals and each bit in the register is a D Flip Flop.
The answer requires illustration, so you can send me the answer via email if you'd like: glitterized_dreamz@hotmail.com
Any help would be greatly appreciated, I've been stuck on this one question for hours and I can't find a single website that talks about this small problem.
There are three 2-bit registers A,B, and C. Design the logic to perform:
AND: C <-- A "and" B
OR: C <-- A "or" B
And and Or are control signals and each bit in the register is a D Flip Flop.
The answer requires illustration, so you can send me the answer via email if you'd like: glitterized_dreamz@hotmail.com
Any help would be greatly appreciated, I've been stuck on this one question for hours and I can't find a single website that talks about this small problem.