Greetings,
I'd like to create a PSU, input voltage is 15 VDC, and I need to have regulated +/-12 VDC on the outputs. I'd like to oversize it a bit, so the unit should be able to handle 2A output current on both + and - rails. If that's too high and makes things more complicated, then at least 1-1.5A per rail.
What's the most simple solution to design such a power supply? I have experience designing and building simple units (using rectifiers and linear regulators), but I guess I'll need a more complex circuit for this.
Thanks in advance, regards!
I'd like to create a PSU, input voltage is 15 VDC, and I need to have regulated +/-12 VDC on the outputs. I'd like to oversize it a bit, so the unit should be able to handle 2A output current on both + and - rails. If that's too high and makes things more complicated, then at least 1-1.5A per rail.
What's the most simple solution to design such a power supply? I have experience designing and building simple units (using rectifiers and linear regulators), but I guess I'll need a more complex circuit for this.
Thanks in advance, regards!