12V T5 twist socket specifications

Thread Starter

itolond

Joined Feb 27, 2010
23
Hi Forum,
May seem like an odd request....

I am fabricating a warning light cluster for may car and have obtained a number of T5 12v bulbs (LED) and holders (twist type). I wanted to get a online service to cnc a circuit board to fit the twist holders and supply power ( individual solder points for each bulb) anyone have the specs or a CAD file with this ...perhaps maybe.....?

example here
https://goo.gl/images/K2o1tD
 

shortbus

Joined Sep 30, 2009
10,045
Something isn't adding up here. A T-5 is a wedge base bulb, so why even use the socket? Just bend the wires back from the wedge sides of the base and just solder them into through holes in the PCB.
 

Thread Starter

itolond

Joined Feb 27, 2010
23
Something isn't adding up here. A T-5 is a wedge base bulb, so why even use the socket? Just bend the wires back from the wedge sides of the base and just solder them into through holes in the PCB.
all items need to be removable -including replacing wedge lights and the base (environmental)
 
Top